Description
Benefits
Cleans and Brightens Aluminum
Economical Dilution Rates
Fast Rinsing
Dilution Ratio: 1:5 to 1:20, 5 gallons makes 105 gallons
To Apply: DO NOT use on glass, polished aluminum or anodized aluminum. DO NOT use Fleet Aluminum Brightener through
the high pressure pump. Use through a downstream injector only to prevent damage to the pump.
Directions: INDUSTRIAL USE ONLY. Read the Safety Data Sheet thoroughly before using this product. For heavy soils, mix
with water at a 1:5 dilution rate. For light soils, mix at 1:20 (pH 2.3 at dilution). Rapidly wet surface with diluted Fleet
Aluminum Brightener and allow it to stand for a few minutes. Clean entire surface lightly with a pressure washer or brush,
then rinse thoroughly with plenty of clean water.
Technical Data
Color: Light straw, clear
Scent: Sharp
Foam 1-5: 3 = Medium to 2 = Low
Reaction in Hard Water 1-5: 4 = Fair
pH at Full Strength: Less than 1
pH at Use Dilution (1:20 Ratio): 2.3